WALLPAP

FAÇADE CONSTRUCTION PANEL

APPLICATIONS

The “WALLPAP” façade panel is the ideal solution for wall cladding. It is assembled longitudinally using a tongue and groove joint system produced in the shaping machine of the continuous production line, whose design hides the screws once installed.
They can also be used for all kind of constructions and industrial buildings, with smooth, ribbed and micro-profiled finishes available.

CERTIFICATES

AVAILABLE FINISHES

Fretted

Micro-profiled

Smooth

Illustrative image that does not show the entire constructive width.

MATERIALS
AVAILABLE THICKNESSES AND LENGTHS
THERMAL TRANSMITTANCE
PERMITTED LOADS

BASE MATERIAL

PRELACQUERED GALVANISED STEEL SHEET

S220/S250 steel from Z140 to Z275, 0.4 – 0.7 mm thick
EN 10346 for galvanised coating and EN 10169 for organic coatings

COATINGS

STANDARD COATING

White polyester lacquer, 25 µm

FINISH OPTIONS

Granite HDX Z275, 55 µm
HPS 200 µm
PVDF 33 y 55 µm
PVC 100 y 200 µm
PET 55 µm

COLOURS

Standard coating: Pyrenees White 1006
Other RAL colours on request

INSULATING CORE

PIR (POLYISOCYANURATE)

Density 40 Kg/m³ ± 2

THICKNESS (mm)

Weight m² of panel with 0.5/0.5 mm sheet (kg/m²)

LENGTH (mm)

THICKNESS (mm)

TEMPERATURE ΔT ºC

Panel thickness (mm)

Panel thickness (mm)

PRESSURE LOAD ON 2 SUPPORT POINTS

THICKNESS (mm)

PRESSURE LOAD ON 3 SUPPORT POINTS

THICKNESS (mm)

Load (daN/m2) Deflection span < L/200 (1 Kgf - 0,98 daN), panel with 0,5/0,5 mm sheet. Values of evenly distributed loads. Acceptable spacing between supports in metres.